LT-5-1000
HOME / Induction heater / 100K-120K Heater / LT-5-1000

LT-5-1000

  • Category: Induction heater
  • Type: LT-5-1000
  • Can do small workpiece forging, quenching, welding, etc.

Information

Made in Taiwan
The panel function has a four-stage heating mode, and each stage of heating power and time can be individually set and stored.

Specification

Model LT-5-1000
Input voltage 220VAC (± 15%) single phase
Input power 5KVA
Oscillation frequency 600K~1000KHz
Output voltage AC 600 VOLT max
Cooling water flow 10L/MIN, 2.5Kg-cm² (35psi)
Host protection module DC overcurrent protection
AC overcurrent protection
Under-phase protection
Input overvoltage protection
Output overvoltage protection
Underwater protection
Over temperature protection
Lead-out line Start/stop signal (3 WIRE)
Machine operation signal (3 WIRE, NO & NC FOR PLC)
DC 0~5V control power (optional)
RS-232 (FOR PLC, PDA, COMPUTER..) power control (optional)
Temperature control (optional)
Estimated weight

Host: 20KG
Heating head: 3KG

Estimated size Host: 38CM (depth), 43CM wide, 15CM high
Heating head: length 13.5CM (depth), width 9CM, height 7CM

Optional

  • Digital temperature controller: with 25mS sampling speed, PID temperature control, automatic logic calculation and optional RS-232 digital interface.
  • Infrared non-contact temperature probe: The temperature range is shown in the table below. There are four probes available.
  • Probe: 40~975° C, 100~600° C, 250~800° C, 385~1

More Products

LTG-60-150
LTG-60-150
LT-100-120
LT-100-120
LT-60-150
LT-60-150
LT-20-200
LT-20-200
LT-30-200
LT-30-200
LT-40-200
LT-40-200